With this pic you can see one of the aluminium strips I made up to fill in the little ridge in the inner fender just above the control arm. It was fiddly work but the finished result was worth the effort. I used Allen head bolts that I polished up instead of the plastic plugs that held in the old original rubber dust covers.

WORK IN PROGRESS
	Here's an overall shot of how the engine looks at present. Not quite where I want it yet but at least it's progressing steadily. I can't wait to pull the motor and really get into the detailing then.
	With this pic you can see one of the aluminium strips I made up to fill in the little ridge in the inner fender just above the control arm. It was fiddly work but the finished result was worth the effort. I used Allen head bolts that I polished up instead of the plastic plugs that held in the old original rubber dust covers.

WORK IN PROGRESS